Grounding Tips


We do NOT recommend fueling into portable containers since under certain environmental conditions, portable containers are susceptible to a build up of static electricity. If fueling into a portable container is unavoidable it is recommended that a ground wire be attached between the portable container and a metal surface on the fuel source. Please observe the following recommended precautions when fueling to or from a portable container as they may greatly reduce the risk of hazardous arcing.

You will need the following supplies:
- Metal wire with alligator clips on each end. Suggested wire size of AWG 16 or larger and a total length of 3 feet. (Should be available from Radio Shack or similar vendor)

If fueling through the Baja Filter into a portable container. Place the container ON THE GROUND. In the following order:
- Place Baja Filter spout into container
- Attach one end of ground wire alligator clip to Baja Filter handle. Insure a solid connection.
- Attach other end of ground wire alligator clip to metal surface on fuel source handle.
- Begin fueling.

If fueling from a portable container through the Baja Filter into a vehicle or vessel fuel inlet:
- Insert Baja Filter into vehicle or vessel fuel inlet.
- Attach one end of ground wire alligator clip to Baja Filter handle.
- Attach other end of ground wire alligator clip to any surface on the portable container other than the container outlet.
- Begin fueling.

After fueling is complete, reverse the grounding process of the steps above and safely secure container with cap.